Raption
80
Instruction Manual
4.11.- Go to Network → Firewall → Port Forwarding → New Port Forward Rule
The ports that you can see in the table below are introduced in the modem by default,
although only the named 50000 and 9191 are enabled:
Name Protocol External port (S) Internal IP Internal port (S)
80 TCP 80 192.168.1.50 80
8080 TCP 8080 192.168.1.50 8080
50000 TCP 50000 192.168.1.50 50000
9191 TCP 9191 192.168.1.1 80
If necessary, it is possible to enable the other ports or introduce them following the table
listed above.
Push over ‘Save’ button after any modification
To Next Page
Loading...
