4.2.- DESCRIPTION OF THE DEVICE
The front of the equipment which is formed by the display, buttons and LEDs, is protected with a
sealable plastic cover which has the appropriate holes to access the RESET, TEST and PROG
keys.
Generic functions of the LEDs and front keypad:
Green LED : Device on
Red LED: Leakage trip
Yellow LED: Pre-alarm
Reset key
Sensitivity setting
Test key
Setup conguration
Pre-alarm conguration
Reset pre-alarm setting
Safety setting
Delay setting
Setup menu rotation
Figure 14: LEDs and keyboard description�
4.3.- LEDs INDICATORS
The device has 2 indicators LEDs, Figure 14.
Table 4: LEDs description: ON dual colour LED
ON Dual colour: Green - Red LED
State Description
Off The device is not operating or is not receiving power supply voltage.
Green The device is operating. It is receiving power supply voltage.
Red The device has tripped.
To Next Page
Loading...
