EasyManuals Logo

Circutor RGU-10 User Manual

Circutor RGU-10
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
3
Instruction Manual
RGU-10, RGU-10C
SAFETY PRECAUTIONS
DANGER
Warns of a risk, which could result in personal injury or material damage.
ATTENTION
Indicatesthatspecialattentionshouldbepaidtoaspecicpoint.
Follow the warnings described in this manual with the symbols shown below.
If you must handle the unit for its installation, start-up or maintenance, the following
should be taken into consideration:
Incorrect handling or installation of the unit may result in injury to personnel as well as damage
to the unit. In particular, handling with voltages applied may result in electric shock, which may
cause death or serious injury to personnel. Defective installation or maintenance may also
leadtotheriskofre.
Read the manual carefully prior to connecting the unit. Follow all installation and maintenance
instructions throughout the unit’s working life. Pay special attention to the installation stan-
dards of the National Electrical Code.
Refer to the instruction manual before using the unit
In this manual, if the instructions marked with this symbol are not respected or carried out correctly, it can
result in injury or damage to the unit and /or installations.
CIRCUTOR,SAreservestherighttomodifyfeaturesortheproductmanualwithoutpriornotication.
DISCLAIMER
CIRCUTOR, SAreservestherighttomakemodicationstothedeviceortheunitspecica-
tions set out in this instruction manual without prior notice.
CIRCUTOR, SA on its web site, supplies its customers with the latest versions of the device
specicationsandthemostupdatedmanuals.
www.circutor.com
CIRCUTOR, recommends using the original cables and accessories that are
supplied with the device.

Table of Contents

Other manuals for Circutor RGU-10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Circutor RGU-10 and is the answer not in the manual?

Circutor RGU-10 Specifications

General IconGeneral
Power Supply230 V AC
MountingDIN rail
Rated voltage230 V AC
Number of poles1
Frequency50/60 Hz
Contact materialSilver alloy
Protection degreeIP20
Electrical life> 10^5 operations
Operating temperature-10 to +50 ºC
Storage temperature-20°C to +70°C
Output Contacts1 changeover (CO)

Related product manuals