Circutor RGU-10 - 5�4�3�- Parity

35
Instruction Manual
RGU-10, RGU-10C
Table 11: Baud rate�
Value on screen Bauds
2.4
2400
4.8
4800
9.6 9600
19.2 19200
38.4
38400
54.6 54600
115
115000
5�4�3�- PARITY
The display shows “PARI” with the set a value on the upper left of the screen.
In order to change parity, repeatedly press the td key to change the values on the upper left of
the screen.
When the required value is on the screen, it is entered and the display moves on the next
screen by pressing PROG, to allow the setting to be changed.
ForcommunicationsettingmenuusingSETUPendsonthisscreen.Itdirectlylinkswiththerst
measurement SETUP screen on the device.