Contents
xxiii
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
Applying the IPv6 ACL to an Interface 24-6
Verifying IPv6 ACLs 24-7
Create and Apply IPv6 ACL: Examples 24-8
CHAPTER
25 Configuring Template ACLs 25-1
Feature History for Template ACLs 25-2
Configuration Tasks for Template ACLs 25-3
Configuring the Maximum Size of Template ACLs (Optional) 25-3
Configuring ACLs Using RADIUS Attribute 242 25-3
Monitoring and Maintaining the Template ACL Configuration 25-5
Configuration Examples for Template ACLs 25-5
access-list template Command 25-5
access-list template Command History 25-6
access-list template Command Modes 25-6
Usage Guidelines for the access-list template Command 25-6
Examples 25-6
show access-list template Command 25-6
show access-list template Command Modes 25-7
show access-list template Command History 25-7
Examples 25-7
CHAPTER
26 Protecting the Router from DoS Attacks 26-1
IP Options Selective Drop 26-1
Feature History for IP Options Selective Drop 26-2
Restrictions for IP Options Selective Drop 26-2
How to Configure IP Options Selective Drop 26-2
Dropping Packets with IP Options 26-2
Verifying IP Options Packets 26-3
Configuration Examples for IP Options Selective Drop 26-3
Dropping IP Options Packets: Example 26-3
Verifying IP Options Handling: Example 26-4
Related Documentation 26-4
CHAPTER
27 IP Tunneling 27-1
GRE Tunnel IP Source and Destination VRF Membership 27-1
Tunnel VRF 27-1
VRF-Aware VPDN Tunnels 27-2
Feature History for GRE Tunnel IP Source and Destination VRF Membership 27-2
To Next Page
Loading...
