Index
IN-3
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
attribute command 5-38
attribute-value pairs 5-25
authen before-forward command 5-5
authentication 1-1
key 5-32, 5-37
tunnel configuration example 5-50
authorization
accept attribute list example 16-41
command 5-37
enabling AAA authorization 5-34
RADIUS attributes 16-40
VPDN tunnel searches 9-5
automatic protection switching, multirouter 1-6
autoprovisioning
ATM PVC
configuration example 8-13
creating VC class 8-6
enabling 8-6, 8-11
enabling on PVC 8-9
enabling on PVC range 8-9
enabling on PVC within a PVC range 8-10
monitoring 8-12
oversubscription 8-2
reload command 8-1
restrictions 8-5
ATM PVC feature 8-1
available bit rate 1-1
definition 1-1
AV pairs 5-25
B
backup 14-28
bandwidth 1-1
reservation 8-14
statistical multiplexing 8-14
BBA 1-1
BBA group
bba-group command 3-21, 6-4, 6-9
configuration example 6-5, 6-11
configuring 3-21, 3-22
configuring PPPoE 6-4, 6-9
bba-group command 3-21
BGP 3-45, 1-1
configuring to advertise networks 3-24
BGP Features 4-10
Allow-AS-in 4-10
AS_PATH attribute 4-10
ASN Override 4-10
BGP AS Path Filtering 4-10
BGP Max Prefix 4-10
BGP Multipath 4-11
BGP Prefix List Filtering 4-10
BGP Route Refresh 4-10
Route Target Rewrite at AS Boundary 4-11
Site of Origin (SoO) 4-10
VRF-aware BGP Dampening 4-11
BGP multipath load sharing 1-27
BGP multipath load sharing, See eiBGP multipath load
sharing
bits per second
See bps
Border Gateway Protocol
See BGP
bps 1-1
bridge 1-1
broadband 1-2
applications
combined with leased-line 1-13
applications, combined with leased-line 1-12, 1-13,
1-14, 1-15
broadband aggregation group 6-4
See also BBA group
Broadband Remote Access Server 22-18
broadband remote access server 1-2
broadcast 1-2
buffers, setting 2-9
To Next Page
Loading...
