Cisco 10000-2P2-2DC - Page 615

Index
IN-19
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
clearing sessions 6-12
configuration example 6-5
configuring in a VPDN group 6-8
definition 1-8
displaying
session count 6-11
session information for session IDs 6-11
sessions statistics 6-11
enabling 6-3, 6-8
specifying
maximum number of PPPoE sessions 3-21, 6-9
maximum number of sessions per MAC
address
3-21
maximum number of VLAN sessions 6-9
PPPoE circuit-tag processing 1-26
pppoe enable command 6-3, 6-8
pppoe limit max-sessions command 3-21, 6-3, 6-8, 6-9
pppoe limit per-mac command 3-21, 6-3, 6-4, 6-9
pppoe limit per-vc command 3-21, 6-4
pppoe limit per-vlan command 6-9
pppoe limit per-vlan command 6-9
pppoe mac-address command 3-20
PPPoEoA, definition 1-8
PPPoE over Ethernet 6-1, 6-11, 1-8
PPPoE over IEEE 802.1Q VLAN
configuration example 6-10
definition 1-8
feature 6-7
verifying 6-11
PPPoE over Q-in-Q 1-28
PPP over MPLS 20-36
PPPoX 16-51, 1-8
PPP terminated aggregation
definition 1-8
to VRF
RADIUS attribute screening feature 16-39
See also PTA
PPP Termination Aggregation 22-18
ppp timeout authentication command 2-10
PQ 1-8
primary card 14-28
private server
configuring 5-31
description 5-24
protocol command 8-3
Protocol-Independent Multicast
See PIM
protocol pppoe command 6-3
provider edge router
See PE router
pseudowire-class
configuring 20-13
pseudowire connections
setting up 20-12
pseudowire emulation edge-to-edge MIBs for Ethernet and
Frame Relay services
1-24
PTA
architectures 1-2
definition 1-8
RADIUS attribute screening feature 16-39
to VRF architecture 1-3
PTA-MD 1-8
PTA multi-domain
See PTA-MD
PVC 1-8
two protocols configured on same DSL line 3-20
pvc-in-range command 8-8, 8-10
PVP 1-8
PXF 1-8
PXF stall monitor 17-61
Q
QinQ 20-22
Configuration Examples 20-25
Ethernet VLAN Q-in-Q AToM 20-23
Prerequisites 20-23