Index
IN-20
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
QinQ Tunneling Based on Inner and Outer VLAN
Tags 20-24
Restrictions 20-23
Verifying QinQ AToM 20-25
QoS 1-8
QoS broadband aggregation enhancements 1-26
QoS features 4-12
Diff-Serv on Egress PE 4-13
Diff-Serv on Ingress PE 4-13
DSCP 4-13
EXP 4-13
FRF.12 4-13
QoS MQC commands
in Frame Relay-to-Frame Relay local switching 20-34
quality of service 1-8
queue-limit command 2-7
queue scaling 2-7
R
RADIUS
AAA 5-34
accept attribute list 5-24, 5-37, 16-39, 16-40, 16-41
accounting
accept attribute list example 16-42
client 1-9
address assignment 10-2
attribute
151 Session-Svr-Key 16-56
1 User-Name 16-56
31 Calling-Station-ID 16-51
40 Acct-Status-Type 16-40
41 Acct-Delay-Time 16-40
44 Accounting Session ID 5-12, 5-35, 16-40
44 Acct-Session-Id 16-56
4 NAS-IP-Address 16-40
5 NAS-Port 16-46
61 NAS-Port-Type 16-45
66 Tunnel-Client-Endpoint 16-41
67 Tunnel-Server-Endpoint 16-41
69 tunnel-Password 5-26
6 Service-Type 16-40, 16-41
7 Framed-Protocol 16-40, 16-41
87 NAS-Port-ID 16-46
8 Framed-IP-Address 16-56
90 Tunnel-Client-Auth-ID 5-26
Acct-Status-Type 5-40
Acct-Tunnel-Connection 5-39
Acct-Tunnel-Packets-Lost 5-39
IETF A-1
Tunnel-Client-Endpoint 5-39
Tunnel-Server-Endpoint 5-39
vendor-proprietary A-4
vendor-specific A-8
authentication 2-9
configuring
attribute accept or reject list 5-37, 5-38
authorization reject attribute list example 16-42
on the Cisco 10000 router 10-9
service profile for tunnel service
authorization
5-15
session per tunnel limiting 5-16
configuring a downstream VRF for 4-26
configuring for half-duplex VRF support 4-28
definition 1-9
displaying accounting and authentication
statistics
5-38, 5-51
enabling tunnel sharing 5-13
filtering attributes 5-37
grouping RADIUS server hosts 5-37
logical line ID 16-52
per VRF AAA feature 3-30
RADIUS attribute screening 16-39
feature 5-24
verification 5-38
reject attribute list 5-24, 5-37, 16-39, 16-40, 16-41
required attributes
for authorization and accounting 16-40
To Next Page
Loading...
