Cisco 10000-2P2-2DC - Page 622

Index
IN-26
Cisco 10000 Series Router Software Configuration Guide
OL-2226-23
virtual-template command 6-4
virtual template interface
configuring 5-23, 5-29, 6-2
creating 5-29
interface-specific commands 2-11
specifying 3-21, 6-3, 6-4, 6-9
VLAN 5-22, 1-11
VLAN-based load balancing 23-12
VLAN ID Rewrite 20-27
VLAN mode 20-20
VLAN range feature
configuration examples 6-17
configuring a range of subinterfaces 6-16
creating and saving a range 6-16
restrictions 6-16
verifying configuration 6-18
VP, See virtual path tunnels.
VPDN
associating a VPDN group 6-3, 6-8
creating an accept dial-in VPDN group 6-3
defining local group name 5-7, 5-29
definition 1-11
displaying
active L2F protocol information 6-11
active L2TP or L2F sessions information 6-11
enabling 5-29
enabling multihop functionality 9-3
enabling VPDN functionality 9-3
group 4-16
accept-dialin 9-6
applying VPDN parameters 4-16
configuration examples 4-19
detaching from a VPDN template 4-16
request-dialout 9-7
template 4-16
configuring 4-17
templates
nesting 4-17
tunnel authorization searches 9-5
vpdn
authorize domain command 5-4
enable command 4-18, 5-29, 6-3, 6-8, 9-3
ip udp ignore checksum command 2-19
multihop command 9-3
search-order command 9-5
session-limit command 4-18
VPDN group
accept-dialin 9-1
configuring 3-19
request-dialout 9-1
vpdn-group command 5-7, 5-8, 5-12, 5-25, 5-29, 5-36, 6-3,
6-8, 9-4
vpdn-template command 4-18
vpdn tunnel authorization network command 5-42
vpdn-vtemplate 5-44
VPI 1-11
VPN 1-11
configuring VPN ID 3-27
displaying debug traces 5-35
identifier suboption 3-9
verifying operation 3-30
vpn id command 3-8
vpn service command 5-9
vpn service domain-name command 5-5
vpn command 27-2, 27-4
vpnv4 1-11
VRF
associating with an interface 4-25, 5-34
configuring
AAA accounting for VRF 5-32
reference of AAA RADIUS server group 5-32
VRF 5-23, 5-36
configuring for a VPN 3-23
definition 1-11
domain-stripping 5-35
downstream 4-22, 4-24, 4-26
enabling VRF-aware domain-stripping 5-12
placing sessions 5-22