Cisco 15216 EDFA2 User Manual

FINAL DRAFT - CISCO CONFIDENTIAL
Contents
iv
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
3.2 Standard Precautions 3-1
3.3 Placement and Power Connection 3-1
3.3.1 General Rack Considerations 3-1
3.3.2 Rack Installation and Power Supply Connection Procedures 3-2
3.4 SC/UPC Optical Ports 3-3
3.4.1 Safety Requirements 3-3
3.4.2 Optical Connection Procedure 3-3
3.4.3 Optical Amplification Operation Verification Procedure 3-4
3.5 Communications 3-5
3.5.1 Alarm Out Relay Interface (RJ-45) 3-5
3.5.2 Alarm LEDs 3-6
3.5.3 Serial Interface (EIA/TIA-232) Communication 3-7
3.5.4 Serial Interface Remote Communication via Modem 3-11
3.5.5 LAN Interface (Ethernet) 3-14
CHAPTER 4 Provisioning Using ASH and SNMP 4-1
4.1 Log In via RS-232 (EIA/TIA-232) Port Using HyperTerminal 4-1
4.2 Set IP Address 4-3
4.3 Log In via LAN Port Using Telnet (Optional) 4-3
4.4 Set Date and Time 4-4
4.5 Set Power Bus Mode (Simplex or Duplex) 4-4
4.6 Verify Amplifier Operational Status 4-4
4.7 Set Gain 4-5
4.8 Set Alarm Thresholds 4-5
4.9 Set Password 4-10
4.10 Add Users 4-11
4.11 Save Changes 4-11
4.12 Log Off 4-12
4.13 Back Up System Configuration 4-12
4.14 Restore System Configuration 4-13
4.15 Recover Default Password 4-14
CHAPTER 5 SNMP MIB Installation and Configuration 5-1
5.1 SNMP Overview 5-1
5.1.1 SNMP Components 5-1
5.1.2 ONS 15216 EDFA2 SNMP Elements 5-2
5.1.3 SNMP MIBs and Message Types 5-3

Cisco 15216 EDFA2 Specifications

General

Brand	Cisco
Model	15216 EDFA2
Category	Network Router
Language	English