Cisco 15216 EDFA2 User Manual

FINAL DRAFT - CISCO CONFIDENTIAL
Contents
v
Cisco ONS 15216 EDFA2 Operations Guide
78-16033-01
5.1.4 Command Syntax Using the SNMP Agent 5-4
5.2 Enabling SNMP Remote Management Community Strings 5-5
5.2.1 Creating a View 5-6
5.2.2 Creating a Community Entry 5-7
5.3 Setup for CTM Access 5-10
5.4 Tables and Groups 5-11
5.4.1 CfgGroup Table 5-12
5.4.2 PumpCfgEntry Table 5-14
5.4.3 OverallStatusGroup Table 5-16
5.4.4 OverallControl Table 5-18
5.4.5 PumpStatusEntry Table 5-18
5.4.6 AlarmEntry Table 5-19
5.4.7 OpGroup Table 5-20
5.4.8 VersionGroup Table 5-21
5.5 Setting Up Traps 5-21
5.5.1 Display Trap Command 5-22
5.5.2 Set Trap Command 5-23
5.5.3 Set Agent Trap Enable 5-23
5.5.4 Get Agent Trap Enable 5-24
5.6 Retrieving Information 5-24
5.6.1 IP Address 5-24
5.6.2 Date and Time 5-25
5.6.3 Power Gain 5-26
5.6.4 Case Temperature 5-27
5.6.5 Power Bus 5-29
5.6.6 Input Power (Signal) 5-30
5.6.7 Output Power 5-31
5.6.8 Database Backup and Restore 5-34
5.6.9 Alarm Entry 5-36
5.7 Summary of SNMP Alarms 5-37
CHAPTER 6 ASH Commands 6-1
6.1 Summary of Security Permissions for ASH Commands 6-1
6.2 Configuration Commands 6-6
6.2.1 srom cfg boot display Command 6-6
6.2.2 srom cfg boot modify Command 6-7
6.2.3 srom cfg ip display Command 6-7
6.2.4 srom cfg ip modify Command 6-8
6.2.5 pdm busmode display Command 6-8

Cisco 15216 EDFA2 Specifications

General

Brand	Cisco
Model	15216 EDFA2
Category	Network Router
Language	English