Cisco 2431 - IAD Router - Configuring with the Command-Line Interface

2-9
Cisco ME 2400 Ethernet Access Switch Hardware Installation Guide
OL-7678-01
Chapter 2 Switch Installation
Installing the Switch
Attaching Brackets to the Switch
The bracket orientation and the brackets that you use depend on whether you are attaching the brackets
for a 19-inch, 23-inch, 24-inch, or an ETSI rack. Figure 2-2 shows the four types of mounting brackets.
Figure 2-2 Rack-Mounting Brackets
• For 19-inch racks, use part number RCKMNT-19IN-1RU (700-08209-XX), and see Attaching
Brackets to 19-Inch Racks, page 2-10.
• For 23-inch racks, use part number RCKMNT-23IN-1RU= (700-21646-XX), and see Attaching
Brackets for 23-Inch Racks, page 2-11.
• For 24-inch racks, use part number RCKMNT-24IN-1RU (700-13248-XX), and see Attaching
Brackets to 24-Inch Racks, page 2-12.
• For ETSI racks, use part number RCKMNT-ETSI-1RU= (700-19781-XX), and see Attaching
Brackets for ETSI Racks, page 2-14.
19 inch
23 inch
ETSI
132869
24 inch