Cisco 350 Series Administration Guide

11
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 193
Smartport
This document describes the Smartports feature.
It contains the following topics:
•Overview
• How the Smartport Feature Works
• Auto Smartport
• Error Handling
• Default Configuration
• Relationships with Other Features
• Common Smartport Tasks
• Configuring Smartport Using The Web-based Interface
• Built-in Smartport Macros
Overview
The Smartport feature is designed to provide a means of quickly configuring network devices,
such as IP phones, printers, routers and Access Points (APs).
Using this feature, you create a “Smartport” macro, which is simply a script containing CLI
commands. These CLI commands specify the device configuration. After creating a Smartport
macro, it is applied to one or more devices. The result is that these devices share a common
configuration.
The Smartport feature works in conjunction with other features such as:
• Voice VLAN and Smartport, described in the Voice VLAN section.

Cisco 350 Series Specifications

General

Model	Cisco 350 Series
Category	Switch
Ports	8, 24, 48
PoE	Available on some models
Layer	Layer 2
Switching Capacity	Up to 104 Gbps
VLAN Support	Yes (up to 256 VLANs)
QoS	Yes
Management	Web, CLI, SNMP
Security Features	ACLs, 802.1X, Port Security
Jumbo Frame Support	Yes
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90% non-condensing
Port Type	Gigabit Ethernet, Fast Ethernet (depending on model)