Cisco 350 Series Administration Guide

Smart Network Application (SNA)
Device Authorization Control (DAC)
510 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
25
Device Authorization Control (DAC)
Use the Device Authorization Control (DAC) feature to configure a list of authorized client
devices in the network. DAC activates 802.1x features on SNA devices in the network and an
embedded RADIUS server (RADIUS host server) can be configured on one of the SNA
devices. Device authorization is done via MAC authentication.
DAC Workflow
The DAC workflow consists of the following steps:
STEP 1 Activate DAC. See Accessing DAC.
STEP 2 Configure a RADIUS server device and client devices. See Specify a RADIUS Server
and Clients.
STEP 3 Add the client devices to the white list. See DAC List Management.
Accessing DAC
To access DAC, perform the following:
STEP 1 Click the options menu in the left-hand side of the masthead:
The following menu is displayed:
STEP 2 Select Edit DAC Mode.

Cisco 350 Series Specifications

General

Model	Cisco 350 Series
Category	Switch
Ports	8, 24, 48
PoE	Available on some models
Layer	Layer 2
Switching Capacity	Up to 104 Gbps
VLAN Support	Yes (up to 256 VLANs)
QoS	Yes
Management	Web, CLI, SNMP
Security Features	ACLs, 802.1X, Port Security
Jumbo Frame Support	Yes
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90% non-condensing
Port Type	Gigabit Ethernet, Fast Ethernet (depending on model)