IP Configuration
IPv4 Management and Interfaces
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 311
16
No validation is made of the hex value, therefore if you enter a HEX value, which
represents an illegal value, no error is provided, and the client might not be able to
handle the DHCP packet from the server.
- IP—Select if you want to enter an IP address when this is relevant for the DHCP
option selected.
- IP List—Enter list of IP addresses separated by commas.
- Integer—Select if you want to enter an integer value of the parameter for the DHCP
option selected.
- Boolean—Select if the parameter for the DHCP option selected is Boolean.
• Boolean Value—If the type was Boolean, select the value to be returned: True or False.
• Value If the type is not Boolean, enter the value to be sent for this code.
• Description—Enter a text description for documentation purposes.
STEP 4 Click Apply. The Running Configuration file is updated.
Address Binding
Use the Address Binding page to view and remove the IP addresses allocated by the device
and their corresponding MAC addresses.
To view and/or remove address bindings:
STEP 1 Click IP Configuration > IPv4 Management and Interfaces > DHCP Server > Address
Binding.
The following fields for the address bindings are displayed:
• IP Address—The IP addresses of the DHCP clients.
• Address Type— Whether the address of the DHCP client appears as a MAC address or
using a client identifier.
• MAC Address/Client Identifier—A unique identification of the client specified as a
MAC Address or in hexadecimal notation, e.g., 01b60819681172.
• Lease Expiration—The lease expiration date and time of the host’s IP address or
Infinite is such was the lease duration defined.
To Next Page
Loading...
Need help?
General
