Cisco 350 Series Administration Guide

Security
RADIUS
328 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
17
• Secret Key—Address of switch containing RADIUS client.
- Use default key—For specified servers, the device attempts to authenticate the
RADIUS client by using the existing, default Key String.
- Encrypted—To encrypt communications by using MD5, enter the key in encrypted
form.
- Plaintext—Enter the key string in plaintext mode.
STEP 5 Click Apply. The key for the device is updated in the Running Configuration file.
RADIUS Server Groups
To set up a group of users that will be using the device as its RADIUS server:
STEP 1 Click Security > RADIUS Server > RADIUS Server Groups.
STEP 2 Click Add and enter the following fields:
• Group Name—Enter a name for the group.
• Privilege Level—Enter the management access privilege level of the group.
• Time Range—Check to enable applying a time range to this group.
• Time Range Name—If Time Range is selected, select the time range to be used. Click
Edit to define a time range in the Time Range section. This field is only displayed if a
Time Range was previously created.
• VLAN—Select the VLAN for the users:
- None—No VLAN ID is sent.
- VLAN ID—VLAN ID sent.
- VLAN Name—VLAN name sent
STEP 3 Click Apply. The RADIUS group definition is added to the Running Configuration file of the
device.

Cisco 350 Series Specifications

General

Model	Cisco 350 Series
Category	Switch
Ports	8, 24, 48
PoE	Available on some models
Layer	Layer 2
Switching Capacity	Up to 104 Gbps
VLAN Support	Yes (up to 256 VLANs)
QoS	Yes
Management	Web, CLI, SNMP
Security Features	ACLs, 802.1X, Port Security
Jumbo Frame Support	Yes
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90% non-condensing
Port Type	Gigabit Ethernet, Fast Ethernet (depending on model)