Security: 802.1X Authentication
Web Authentication Customization
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 373
18
- Hyperlink Color—Enter the ASCII code of the hyperlink color. The selected color
is shown in the Text field.
• Current Logo Image—Displays the name of the file containing the current logo image.
• Logo Image—Select one of the following options:
- None—No logo.
- Default—Use the default logo.
- Other—Select to enter a customized logo.
If the Other logo option is selected, the following options are available:
- Logo Image Filename—Enter the logo file name or Browse to the image.
- Application Text—Enter text to accompany the logo.
- Window Title Text—Enter a title for the Login page.
STEP 4 Click Apply and the settings are saved to the Running Configuration file.
STEP 5 Click Edit labeled 2. The following fields are displayed:
• Invalid User Credentials—Enter the text of the message to be displayed when the end
user enters an invalid username or password.
• Service Not Available—Enter the text of the message to be displayed when the
authentication service is not available.
STEP 6 Click Apply and the settings are saved to the Running Configuration file.
STEP 7 Click Edit labeled 3. The following fields are displayed:
• Welcome Message—Enter the text of the message to be displayed when the end user
logs on.
• Instructional Message—Enter the instructions to be displayed to the end user.
• RADIUS Authentication—Displays whether RADIUS authentication is enabled. If so,
the username and password must be included in the login page.
• Username Textbox—Select for a username textbox to be displayed.
• Username Textbox Label—Select the label to be displayed before the username
textbox.
• Password Textbox—Select for a password textbox to be displayed.
To Next Page
Loading...
Need help?
General
