EasyManuals Logo

Cisco 350 Series Administration Guide

Cisco 350 Series
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #631 background imageLoading...
Page #631 background image
Access Control
ACL Binding
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 411
22
IPv6 ACL—ACLs of type IPv6 that are bound to the interface (if any).
Default Action—Action of the ACLs rules (drop any/permit any).
NOTE To unbind all ACLs from an interface, select the interface, and click Clear.
STEP 4 Select an interface, and click Edit.
STEP 5 Enter the following for input and output ACLs:
Input ACL
MAC-Based ACL—Select a MAC-based ACL to be bound to the interface.
IPv4-Based ACL—Select an IPv4-based ACL to be bound to the interface.
IPv6-Based ACL—Select an IPv6-based ACL to be bound to the interface.
Default Action—Select one of the following options:
- Deny Any—If packet does not match an ACL, it is denied (dropped).
- Permit Any—If packet does not match an ACL, it is permitted (forwarded).
NOTE Default Action can be defined only if IP Source Guard is not activated on the
interface.
Output ACL
MAC-Based ACL—Select a MAC-based ACL to be bound to the interface.
IPv4-Based ACL—Select an IPv4-based ACL to be bound to the interface.
IPv6-Based ACL—Select an IPv6-based ACL to be bound to the interface.
Default Action—Select one of the following options:
- Deny Any—If packet does not match an ACL, it is denied (dropped).
- Permit Any—If packet does not match an ACL, it is permitted (forwarded).
NOTE Default Action can be defined only if IP Source Guard is not activated on the
interface.
STEP 6 Click Apply. The ACL binding is modified, and the Running Configuration file is updated.
NOTE If no ACL is selected, the ACL(s) that is previously bound to the interface are unbound.

Table of Contents

Other manuals for Cisco 350 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 350 Series and is the answer not in the manual?

Cisco 350 Series Specifications

General IconGeneral
ModelCisco 350 Series
CategorySwitch
Ports8, 24, 48
PoEAvailable on some models
LayerLayer 2
Switching CapacityUp to 104 Gbps
VLAN SupportYes (up to 256 VLANs)
QoSYes
ManagementWeb, CLI, SNMP
Security FeaturesACLs, 802.1X, Port Security
Jumbo Frame SupportYes
Power SupplyInternal
DimensionsVaries by model
WeightVaries by model
Operating Temperature0°C to 45°C (32°F to 113°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Humidity10% to 90% non-condensing
Port TypeGigabit Ethernet, Fast Ethernet (depending on model)

Related product manuals