Cisco 350 Series Administration Guide

Smart Network Application (SNA)
Topology View
472 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
25
- Selectable and detectable by the search functionality. When an offline device is
selected, the information panel displays the device’s basic identifying information
and tags, but no services, notifications, or general information beyond the basic
identifiers.
- Unable to launch the device explorer or the device management GUI of offline
devices.
- Can be manually removed. After a device is removed, it no longer appears on the
topology map until it is detected or added manually. All tags associated with this
device are lost, and is not restored even if the device is detected again in the future.
SNA periodically attempts to connect to offline devices to verify if a managed or an
SNA switch has come back online. During these attempts, an indication is displayed on
the device.
• Client devices – End-point clients of the network (for example, PCs, IP phones)
usually connected to a backbone device. In the topology map, these devices are
displayed grouped with other devices of the same type that are connected to the same
backbone device. These grouping of devices are called client groups, and individual
clients comprising a client group can be viewed by clicking and entering its explorer
(see Explorers).

Cisco 350 Series Specifications

General

Model	Cisco 350 Series
Category	Switch
Ports	8, 24, 48
PoE	Available on some models
Layer	Layer 2
Switching Capacity	Up to 104 Gbps
VLAN Support	Yes (up to 256 VLANs)
QoS	Yes
Management	Web, CLI, SNMP
Security Features	ACLs, 802.1X, Port Security
Jumbo Frame Support	Yes
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90% non-condensing
Port Type	Gigabit Ethernet, Fast Ethernet (depending on model)