Cisco 350 Series Administration Guide

Smart Network Application (SNA)
Notifications
508 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
25
You can view notifications in the following ways:
• Select a single managed or SNA switch. The top three notifications, ordered by
severity and time, are displayed in the notifications section of the right-hand
information.
• Click Show Notifications to expand the list on the right-hand information to see a
table containing the last 100 SYSLOGs recorded on the device. This option is
available for all SNA switches, and displays the last 100 SYSLOGs regardless of
whether they occurred while the SNA session was active or inactive.
• Click to view the table containing an aggregated list of notifications for the
complete network. This table displays the last 300 events logged in the network by
SNA or partial-SNA devices.
Viewing the specifics of a notification removes the new notification annotation from the
topology view, but all notifications are still available from the notification log and the recent
notifications can still be viewed on the side panel.
When viewing notifications, the following attributes are displayed:
• Originating device — Appears only in the aggregated notifications display. The
originating device is identified by the strongest available form of identification
according to the following priority: Host name  IP address  MAC address.

Cisco 350 Series Specifications

General

Model	Cisco 350 Series
Category	Switch
Ports	8, 24, 48
PoE	Available on some models
Layer	Layer 2
Switching Capacity	Up to 104 Gbps
VLAN Support	Yes (up to 256 VLANs)
QoS	Yes
Management	Web, CLI, SNMP
Security Features	ACLs, 802.1X, Port Security
Jumbo Frame Support	Yes
Power Supply	Internal
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90% non-condensing
Port Type	Gigabit Ethernet, Fast Ethernet (depending on model)