EasyManuals Logo

Cisco 3925 User Manual

Cisco 3925
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #358 background imageLoading...
Page #358 background image
A-12
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Appendix A Cisco IOS CLI for Initial Configuration
Using the Cisco IOS CLI to Perform Initial Configuration
SUMMARY STEPS
1. enable
2. configure terminal
3. line vty line-number [ending-line-number]
4. password password
5. login
6. end
7. show running-config
8. From another network device, attempt to open a Telnet session to the router.
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
line vty line-number [ending-line-number]
Example:
Router(config)# line vty 0 4
Starts the line configuration command collection mode for
the virtual terminal lines (vty) for remote console access.
Make sure that you configure all vty lines on your
router.
Note To verify the number of vty lines on your router, use
the line vty ? command.
Step 4
password password
Example:
Router(config-line)# password guessagain
Specifies a password on a line.
Step 5
login
Example:
Router(config-line)# login
Enables password checking at login.
Step 6
end
Example:
Router(config-line)# end
Returns to privileged EXEC mode.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3925 and is the answer not in the manual?

Cisco 3925 Specifications

General IconGeneral
Product TypeRouter
Form FactorRack-mountable
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Connectivity TechnologyWired
PowerAC 120/230 V (50/60 Hz)
Redundant Power SupplyOptional
Routing ProtocolOSPF, IS-IS, BGP, EIGRP, PIM
Network/Transport ProtocolIPSec
Remote Management ProtocolSNMP, Telnet, SSH, HTTP
Encryption AlgorithmDES, Triple DES, AES
Flash Memory256 MB
Weight11.5 kg
Interfaces2 x SFP (mini-GBIC)
Power SourceInternal power supply
Authentication MethodRADIUS, TACACS+, LDAP
Compliant StandardsIEEE 802.1Q, IEEE 802.3af
Operating Temperature0 to 40 °C
Operating Humidity5% to 85% (non-condensing)
Dimensions (WxDxH)44.5 x 47.2 x 8.9 cm

Related product manuals