EasyManuals Logo

Cisco 3925 User Manual

Cisco 3925
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #52 background imageLoading...
Page #52 background image
44
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Ethernet CFM and Y.1731 Performance Monitoring on Layer 3 Interfaces
CFM Support on Routed Port and Port MEP
Configuring Ethernet CFM (Single-Tagged Packets)
Complete these steps to configure and enable Ethernet CFM for single-tagged packets:
SUMMARY STEPS
Step 1 enable
Step 2 configure terminal
Step 3 ethernet cfm ieee
Step 4 ethernet cfm global
Step 5 ethernet cfm domain domain-name level level-id
Step 6 service service-name vlan vlan-id direction down
Step 7 continuity-check
Step 8 interface gigabitethernet slot/port
Step 9 ethernet cfm mep domain domain-name mpid value service service-name
Step 10 interface gigabitethernet slot/port.subinterface
Step 11 encapsulation dot1q vlan-id
Step 12 end
DETAILED STEPS
Command Purpose
Step 1
enable
Example:
Router>enable
Enables the privileged EXEC mode.
Enter your password when prompted.
Step 2
configure terminal
Example:
Router#configure terminal
Enters the global configuration mode.
Step 3
ethernet cfm ieee
Example:
Router(config)#ethernet cfm ieee
Enables the IEEE version of CFM.
Step 4
ethernet cfm global
Example:
Router(config)#ethernet cfm global
Enables CFM processing globally on the router.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 3925 and is the answer not in the manual?

Cisco 3925 Specifications

General IconGeneral
Product TypeRouter
Form FactorRack-mountable
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Connectivity TechnologyWired
PowerAC 120/230 V (50/60 Hz)
Redundant Power SupplyOptional
Routing ProtocolOSPF, IS-IS, BGP, EIGRP, PIM
Network/Transport ProtocolIPSec
Remote Management ProtocolSNMP, Telnet, SSH, HTTP
Encryption AlgorithmDES, Triple DES, AES
Flash Memory256 MB
Weight11.5 kg
Interfaces2 x SFP (mini-GBIC)
Power SourceInternal power supply
Authentication MethodRADIUS, TACACS+, LDAP
Compliant StandardsIEEE 802.1Q, IEEE 802.3af
Operating Temperature0 to 40 °C
Operating Humidity5% to 85% (non-condensing)
Dimensions (WxDxH)44.5 x 47.2 x 8.9 cm

Related product manuals