Cisco 4200 Series - Hardware Specifications

CommentsPIDOptics Type
100GBASE FR QSFP transceiver,
2 km over SMF, LC connector
QSFP-100G-FR-S100G-FR
100GBASE DR QSFP transceiver,
500 m over SMF, LC connector
QSFP-100G-DR-S100G-DR
Hardware Specifications
The following table contains hardware specifications for the Secure Firewall 4200.
Table 8: Secure Firewall 4200 Hardware Specifications
424542254215Specification
1.73 x 16.89 x 32.0 inches (4.39 x 42.9 x 81.28 cm)Chassis dimensions (H x
W x D)
1.41 x 3.66 x 9.94 inches (3.58 x 9.3 x 25.25 cm)Network module
dimensions (H x W x D)
46 lb (20.8 kg)43 lb (19.5 kg)
43 lb (19.5 kg)Chassis weight
(2 power supplies, 2
network modules, 3 fan
modules)
36 lb (16.3 kg)33 lb (15 kg)33 lb (15 kg)Chassis weight
(no powers supplies, no
network modules, no fan
modules)
1380 W870 W770 WSystem input power
Operating: 32 to 104°F (-0 to 40°C)
Nonoperating: -40 to 149°F (-40 to 65°C) maximum altitude is 40,000 ft
Temperature
Operating: 5 to 90% noncondensing
Nonoperating: 5 to 90% noncondensing
Humidity
Operating: 0 to 10,000 ft (0 to 1829 m) maximum
Nonoperating: 40,000 ft (12,192 m) maximum
Altitude
< 63 dBA (typical)
<85 dBA (maximum)
Sound pressure
<76 dB (typical)
<96 dB (maximum)
Sound power
Cisco Secure Firewall 4200 Series Hardware Installation Guide
35
Overview
Hardware Specifications