To Next PageTo Next Page
Need help?Do you have a question about the Cisco 4200 Series and is the answer not in the manual?
Provides a general introduction to the Cisco Secure Firewall 4200 series.
Details the key features and specifications of the Cisco Secure Firewall 4200.
Explains various deployment scenarios for the Cisco Secure Firewall 4200.
Lists the items included in the Secure Firewall 4200 package.
Information on locating serial numbers and accessing documentation via QR code.
Describes the components and indicators on the front panel of the Secure Firewall 4200.
Explains the status and meaning of the LEDs on the front panel.
Details the components and connectors on the rear panel of the Secure Firewall 4200.
Information on the 8-port 1/10/25-Gb network module and its installation.
Details the 4-port 40-Gb network module and its installation.
Information on the 2-port 100-Gb network module and its installation.
Details the 4-port 200-Gb network module and its capabilities.
Explains the 8-port 1000Base-T module with hardware bypass functionality.
Details the 6-port network modules with hardware bypass features.
Information on the AC power supply modules and their hot-swappable nature.
Details the dual fan modules, their function, and hot-swappable design.
Information about the NVMe SSDs, their configuration, and hot-swapping.
Lists supported SFP, SFP+, and QSFP+ transceivers for connectivity.
Presents detailed hardware specifications for the Secure Firewall 4200 models.
Lists product IDs (PIDs) for chassis and accessories for ordering and identification.
Details the specifications and types of supported power cords for the unit.
Details preparations required before installing the security appliance.
Lists critical safety warnings and instructions for installation.
Provides essential safety guidelines for handling equipment.
Guidelines for safely working with electrical components and power.
Procedures to prevent damage from electrostatic discharge during handling.
Information on environmental factors for optimal equipment operation.
Planning factors for acceptable operating environments and equipment placement.
Key factors to consider regarding power supply installation and requirements.
Guidelines for planning and configuring equipment within a rack.
Provides instructions for physically installing the chassis into a rack.
Procedure for safely unpacking and checking the chassis for damage or missing parts.
Detailed steps for installing the chassis using slide rail assemblies.
Instructions for properly grounding the chassis for safety and protection.
Procedures for installing, maintaining, and upgrading system components.
Steps for installing, removing, and replacing network modules in the chassis.
Procedure for removing and replacing Solid State Drives (SSDs).
Steps for removing and replacing the dual fan modules.
Procedure for removing and replacing the power supply modules.
General| Brand | Cisco |
|---|---|
| Model | 4200 Series |
| Category | Projector Accessories |
| Language | English |
