Index
IN-4
Cisco uBR7200 Series Universal Broadband Router Software Configuration Guide
OL-2239-02
Quality of Service 1-60
service flow model 1-61
Set-Top Gateway Issue 1-97
supported features on Cisco uBR7200 series 1-57
token-bucket rate shaping 3-10, 3-26
two-way transmission 1-65
DOCSIS 2.0
supported features on Cisco uBR7200 series 1-67
DOCSIS 2.0 SAMIS ECR Data Set 1-88
DOCSIS Set-Top Gateway Issue 1.0 1-97
DOCSIS Set-Top Gateway Issue 1.2 1-97, 1-99
downstream
cable ARP requests, activating 3-2
channel ID
configuring 3-5
verifying 3-6
CM interface, configuring 3-2
downstream frequency override 1-65
downstream modulation 3-8
downstream rate shaping with IP type of service
bits
1-66
helper address 3-7
interleave depth 3-8
MPEG framing format 3-9, 3-10
ports 3-3, 3-4
rate limiting 3-10
troubleshooting downstream CM signals 8-6
DRP (Director Response Protocol), server agent 1-69
DSG 1.1 1-97
DSG 1.2 1-99
DSX Messages and Synchronized PHS Information 1-69
dynamic backoff algorithm 5-7
Dynamic Channel Change (DCC) for Loadbalancing 1-89
dynamic contention algorithms 5-6
dynamic map advance algorithm 5-7
dynamic ranging 3-19
Dynamic SID/VRF Mapping Support 1-126
E
Easy IP (phase 1) 1-83
echo, IP broadcast and IP multicast 1-79
EEPROM, MAC address bank 1-17
examples
Internet access C-1, C-3
IP telephony (VoIP) C-12
sample configuration files C-1
show interfaces command output 1-19, 1-21
telco return C-14
virtual private network (VPN) C-9
exec prompt timestamp command 1-33
Extended Setup facility
configuring Cisco uBR7200 series with 2-25
F
figures
Two-way Internet access network example 6-2
framing format, MPEG 3-9, 3-10
frequency, setting upstream 3-22, 3-23
G
Globally Configured HCCP 4+1 Redundancy 1-69
global parameters, configuring 2-18
GRE tunnels 1-127
H
hardware address 1-17
helper address, downstream 3-7
High Availability Features 1-68
High Availability Support for Encrypted IP
Multicast
1-71
host-to-host communication (Proxy ARP) 3-28
HSRP (Hot Standby Router Protocol) 1-126
To Next Page
Loading...
