Name: Cisco 7841
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Figure 15: Phone Bracket Attachment

Slots for mounting tabs2Screw holes1

Step 3 Attach the cables to the phone:

a) Attach the Ethernet cable to the 10/100/1000 SW network port and wall jack.

b) (Optional) If you are connecting a network device (such as a computer) to the phone, attach the cable to

the 10/100/1000 Computer (PC access) port.

c) (Optional) If you use an external power supply, plug the power cord into the phone. Dress the cord by

clipping it into the clips that are incorporated into the phone body next to the PC port.

d) (Optional) If the cables terminate inside the wall bracket, connect the cables to the jacks.

Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide

103

Hardware and Accessory Installation

Install the Non-Lockable Wall Mount Kit

Cisco 7841 Administration Guide

Other manuals for Cisco 7841