Cisco 7911G - IP Phone VoIP Phone Guide

48 OL-15428-01
Tip
Use the numbers on your keypad to enter characters on your phone screen. Use the Navigation button
on your phone to move between input fields.
Using Personal Directory on Your Phone
The Personal Directory feature set contains your Personal Address Book (PAB) and Fast Dial codes.
This section describes how to set up and use Personal Directory on your phone. Alternately, see
Using
Personal Directory on the Web, page 53.
Dial from a corporate
directory (while
connected to another
call)
1. Press , and choose Directories > Corporate Directory (exact name can
vary).
2. User your keypad to enter a full or partial name, and press Search.
3. Scroll to a listing and press Dial.
4. Choose one of the following to handle the original call:
– Hold—Puts the first call on hold.
– Transfer—Transfers the first party to the second and drops you from
the call. (Press Transfer again after dialing to complete the action.)
– Confrn—Creates a conference call with all parties, including you.
(Press Confrn again after dialing to complete the action.)
– EndCall—Disconnects the first call and dials the second.
If you want to... Then...
Access Personal
Directory (for PAB
and Fast Dial codes)
1. Press , and choose Directories > Personal Directory (exact name can
vary).
2. Enter your Cisco Unified Communications Manager user ID and PIN,
then press Submit.
Search for a PAB
entry
1. Access Personal Directory, then choose Personal Address Book.
2. Enter search criteria and press Submit.
3. You can choose Previous or Next to move through listings.
4. Highlight the PAB listing that you want and press Select.
If you want to... Then...

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English