Cisco 7911G - IP Phone VoIP Phone Guide

Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 7.0 1
Getting Started
Using this Guide
This guide provides you with an overview of the features available on your phone. You can read it
completely for a solid understanding of your phone’s capabilities, or refer to the table below for
pointers to commonly-used sections.
If you want to... Then...
Review safety information See Safety and Performance Information, page 2.
Connect your phone See Connecting Your Phone, page 5.
Use your phone after it is installed Start with An Overview of Your Phone, page 9.
Learn about the phone buttons See Understanding Buttons and Hardware, page 9.
Make calls See Placing a Call—Basic Options, page 13.
Put calls on hold See Using Hold and Resume, page 18.
Transfer calls See Transferring Calls, page 20.
Make conference calls See Making Conference Calls, page 23.
Set up speed dialing See Speed Dialing, page 28.
Share a phone number See Using a Shared Line, page 31.
Use the speaker on the phone See Using a Handset, Headset, and Speaker, page 40.
Change the ring volume or tone See Changing Phone Settings, page 43.
View your missed calls See Using Call Logs and Directories, page 45.
Listen to your voice messages See Accessing Voice Messages, page 51.
See softkey and icon definitions Refer to the Quick Reference Card in the front of this guide.
Finding Additional Information
You can access the most current Cisco documentation on the World Wide Web at this URL:
http://www.cisco.com/en/US/products/hw/phones/ps379/tsd_products_support_series_home.html

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English