Priority Call
62 System Telephone Features Cisco 7960/7940 Telephone User Guide
620-05600070B
A voice prompt tells you whether Priority Call is enabled or disabled and
then gives the menu choices.
3. Press 1 to enable Priority Call if it is disabled or to disable the feature if it is
enabled.
4. Hang up.
Adding Members to the Priority Call List
1. Press *61.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Priority Call is enabled or disabled and
then gives the menu choices.
3. Press 2 to add telephone numbers to the list of members who will trigger the
priority ring.
4. Enter the number with no spaces, dashes or special characters followed by
the # key.
5. Press # to save the entry (add it to your list) or press * to cancel the entry,
6. Select a menu item or hang up.
Listing Priority Call Members
1. Press *61.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Priority Call is enabled or disabled and
then gives the menu choices.
3. Press 3 to hear the list of telephone numbers which will trigger the priority
ring.
4. Press # to hear the next number or press * to return to the Priority Call menu.
As long as you press # for the next number, the system will scroll through
the list of member numbers, starting over with the first number after the last
number is spoken.
5. Repeat the previous two steps until you have heard as many of the numbers
as you want.
To Next Page
Loading...
Need help?
General
