Privacy Guard
68 System Telephone Features Cisco 7960/7940 Telephone User Guide
620-05600070B
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 1 to enable Privacy Guard if it is disabled or to disable the feature if it
is enabled.
4. Choose another option or hang up.
Managing the Access Code
Your 3-digit Access Code is managed using the keypad on your telephone. You can
change the code at any time and can listen to your chosen number if you forget
what you set.
Changing the Access Code
1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 2 to set or change the 3-digit Access Code.
4. Enter the Access Code by pressing the desired digit keys on the telephone
keypad.
5. Press # to save the entry or * to exit without saving.
6. Select a menu item or hang up.
Listening to Access Code
1. Press *88 on the telephone keypad.
NOTE: On the 7960 MGCP phone, you may skip the next step.
2. Press the Dial soft key, or line or SPEAKER button, or pickup the handset.
A voice prompt tells you whether Privacy Guard is enabled or disabled and
then gives the menu choices.
3. Press 3 to hear the 3-digit Access Code.
4. Listen to the Access Code.
5. Select a menu item or hang up.
To Next Page
Loading...
Need help?
General
