Cisco 8200 Series User Manual

CHAPTER 5
Replace Chassis Components
• Replace Fan Modules, on page 37
• Replace Power Supply, on page 39
Replace Fan Modules
The fan module is designed to be removed and replaced while the system is operating without presenting an
electrical hazard or damage to the system. Please keep the replacement fan modules ready prior to attempting
this task.
The routers support FAN-1RU-PI (port-side intake airflow) and FAN-1RU-PE (port-side exhaust airflow)
fan modules.
Note
The airflow direction must be the same for all power supply and fan modules in the chassis.
Note
Step 1 To remove a fan module, follow these steps:
a) Press two latches on the fan module and grasp the handle of fan module.
Hardware Installation Guide for Cisco 8200 Series Routers
37

Cisco 8200 Series Specifications

General

Dimensions	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Power Supply	Redundant power supplies
Operating System	Cisco IOS XR
Security Features	ACLs
Virtualization	Supports virtualization features
Product Type	Router
Interfaces	10GE, 40GE, 100GE, 400GE
Ports	Varies by model
Routing Protocols	BGP, OSPF, IS-IS
Weight	Varies by model
Humidity	5% to 95% noncondensing