Cisco 8200 Series User Manual

StatusColorLED
Time core is synchronized to an external source including IEEE1588.
GreenSynchronization
The system is running in holdover or free-run mode and it is not
synchronized to an external interface.
Amber
The centralized frequency or time and phase distribution is not enabled.Off
The GPS interface is provisioned and frequency, time of day and phase
inputs are all operating correctly.
GreenGPS
The GPS interface is not provisioned, or the GPS inputs are not working
correctly.
Off
Fan Tray LED
Fan tray modules are located on the back of the chassis. Each fan tray module has a Status LED.
Figure 20: Fan Tray LED - Cisco 8201 Chassis
StatusColorLED
Fan is operating normally.GreenSTATUS
Fan tray is inserted and pending to come online.Amber
Fan has failed.Flashing
Amber
The operator has activated this LED to identify a specific fan.Flashing Blue
Fan is not receiving power.Off
Hardware Installation Guide for Cisco 8200 Series Routers
43
LEDs
Fan Tray LED

Cisco 8200 Series Specifications

General

Dimensions	Varies by model
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Power Supply	Redundant power supplies
Operating System	Cisco IOS XR
Security Features	ACLs
Virtualization	Supports virtualization features
Product Type	Router
Interfaces	10GE, 40GE, 100GE, 400GE
Ports	Varies by model
Routing Protocols	BGP, OSPF, IS-IS
Weight	Varies by model
Humidity	5% to 95% noncondensing