Cisco 8821

Cisco Wireless IP Phone 8821 and 8821-EX Wireless LAN Deployment Guide
186
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 10.195.19.1
!
radius server MyRadius
address ipv4 10.195.19.63 auth-port 1812 acct-port 1813
key <REMOVED>
!
control-plane
!
line con 0
exec-timeout 0 0
line aux 0
line vty 0 4
exec-timeout 0 0
transport input all
line vty 5 15
exec-timeout 0 0
transport input all
!
scheduler allocate 20000 1000
end
Certificate Removal
Certificates can be removed either via the admin webpage interface or via the local user interface.
To remove a certificate via the admin webpage, select Delete for the corresponding certificate, then restart the phone once a
certificate has been removed.
Bluetooth Settings
The Cisco Wireless IP Phone 8821 and 8821-EX include Bluetooth 3.0 support, which enables hands-free communications.
To pair a Bluetooth headset to the Cisco Wireless IP Phone 8821 and 8821-EX, follow the instructions below.
• Navigate to Settings > Bluetooth.
• Ensure that Bluetooth is set to On.
Ensure Bluetooth is enabled in the Cisco Unified Communications Manager.
• Select Add Bluetooth device.
Ensure the Bluetooth device is in pairing mode.