• Configure the Data Rates as necessary
• Configure Quality of Service (QoS)
Creating the Wireless Network
A wireless network must be created prior to adding any Cisco Meraki access points to provide WLAN service.
Select Create a new network from the drop-down menu.
Select Wireless for Network type then click Create.
Cisco Meraki access points can be claimed either by specifying the serial number or order number.
Once claimed, those Cisco Meraki access points will then be listed in the available inventory.
Cisco Meraki access points can be claimed either by selecting Claim on the Create network or Organization > Configure >
Inventory pages.
Access points can also be claimed by selecting Add APs on the Wireless > Monitor > Access points page, then selecting
Claim.
To Next Page
Loading...
