Cisco 8865 Series Administration Guide

Vertical Service Announcement Codes
DescriptionParameter
Defaults to blank.Service Annc Base Number
Defaults to blank.Service Annc Extension Codes
Outbound Call Codec Selection Codes
DescriptionParameter
Makes this codec the preferred codec for the
associated call.
Defaults to *017110.
Prefer G711u Code
Makes this codec the only codec that can be used for
the associated call.
Defaults to *027110.
Force G711u Code
Makes this codec the preferred codec for the
associated call.
Defaults to *017111
Prefer G711a Code
Makes this codec the only codec that can be used for
the associated call.
Defaults to *027111.
Force G711a Code
Makes this codec the preferred codec for the
associated call.
Defaults to *01722.
Only one G.722 call at a time is allowed. If a
conference call is placed, a SIP re-invite message is
sent to switch the calls to narrowband audio.
Prefer G722 Code
Makes this codec the only codec that can be used for
the associated call.
Defaults to *02722.
Only one G.722 call at a time is allowed. If a
conference call is placed, a SIP re-invite message is
sent to switch the calls to narrowband audio.
Force G722 Code
Makes this codec the preferred codec for the
associated call.
Prefer G722.2 Code
Makes this codec the only codec that can be used for
the associated call.
Force G722.2 Code
Cisco IP Phone 7800 Series Multiplatform Phones Administration Guide
262
Cisco IP Phone Troubleshooting
Vertical Service Announcement Codes

Cisco 8865 Series Specifications

General

Resolution	800 x 480 pixels
Speakerphone	Full-duplex speakerphone
Codec Support	G.711, G.722, G.729, iLBC, Opus
Audio	Wideband audio
Ethernet	10/100/1000 Mbps
USB Ports	2 USB ports
Video	720p HD video
Power	IEEE 802.3af/at Power over Ethernet (PoE)
Protocols	SIP
Headset Connector	RJ9 headset port
Security	802.1X, TLS, SRTP
Weight	1.6 kg