Cisco 8941 Reference Guide

End a conference call:
• Hang up the handset, or press the End Call soft key. The conference call will remain active for
other users still in the call.
Displaying Users in a Conference Call
Step 1
Once successfully joined into a conference call, press
the View Details soft key button.
NOTE: You may need to press the More soft key button
to display the View Details soft key button.
Step 2
You will now see a list of users connected to the
conference call.
NOTE: A * (star) next to a user’s name signifies that the
user is the conference initiator.
If you are the conference initiator, you can remove a
user from a conference call by using the up/down keys
on the navigation pad to select the caller, then press
the Remove soft key button.
18

Cisco 8941 Specifications

General

Resolution	320 x 240 pixels
Protocols	SIP, SCCP
Speakerphone	Full-duplex speakerphone
USB Port	No
Bluetooth	No
Wi-Fi	No
Ethernet	10/100/1000 Mbps
Audio	Wideband audio
Video	No
PoE	IEEE 802.3af compliant
Buttons	4 line keys, navigation cluster
Headset	Yes
Codec Support	G.711, G.722, G.729, iLBC
Headset Port	Yes, RJ9
Weight	1 kg