Cisco 8941 Reference Guide

Redial a Number
To redial the most recently dialed number:
• Lift the handset and press the Redial button on your phone.
• Press the Redial button on your phone to dial using the speakerphone.
Place Call on Hold
To place a call on hold while on the call:
• Press the Hold button on your phone.
To retrieve a held call:
• Press the Resume soft key.
– If multiple calls are on hold, use the Navigation button to select the desired call before
you press Resume.
– If multiple calls on multiple lines are on hold, press the line button for the line that you
want to pick up. The active call on the other line is automatically put on hold.
Note: Because the hold feature can generate music or tones, avoid using hold when dialed into a
remote conference system.
Park a Call
To park a call so that it can be picked up on another UW-Whitewater phone:
Step 1
If video is active during your call, press the More soft key
button, then press the Park soft key button.
If video has been minimized, press the Park button.
8

Cisco 8941 Specifications

General

Resolution	320 x 240 pixels
Protocols	SIP, SCCP
Speakerphone	Full-duplex speakerphone
USB Port	No
Bluetooth	No
Wi-Fi	No
Ethernet	10/100/1000 Mbps
Audio	Wideband audio
Video	No
PoE	IEEE 802.3af compliant
Buttons	4 line keys, navigation cluster
Headset	Yes
Codec Support	G.711, G.722, G.729, iLBC
Headset Port	Yes, RJ9
Weight	1 kg