Cisco 8945 Getting Started

Page 10
Receiving Calls
You can answer a call by lifting the handset or you can use other options.
Answer
1. Perform one of the following:
 Lift the handset.
OR
 Press the Speakerphone button.
Answer with Headset
1. Perform one of the following:
 Press the Headset button if unlit.
OR
 If the Headset is lit, press Answer.
Send a call to Voice message
1. Press the Divert soft key whilst listening to incoming call ring tone.
Hold
Hold allows you to put an active call into a held state. Your phone allows one active call at a
time; other calls are put on hold.
Hold and Resume a Call
1. Press the Hold button.
The Hold icon displays and the line button pulses green.
2. To resume the highlighted call, do one of the following:
 Press the pulsing green session button
OR
 Press the Resume soft key
OR
 Press the Select button in the Navigation pad.
Swap between Holding and Active Calls
You can use session buttons to swap between holding and connected calls. For example,
if you have a held call and an active call, pressing the Session button for the held call
resumes that call and places the other call on hold automatically.

Cisco 8945 Specifications

General

Brand	Cisco
Model	8945
Category	IP Phone
Language	English