Calling Features
Page 11
Redial
Redial allows you to call the most recently dialled phone number by pressing a button.
Redial a Number
1. Press the Redial button, to place the call on a specific phone line.
Call Back
Use Call Back when you dial someone and receive a busy tone. This feature will alert
you once the line is free.
Set up a Call Back Notification
1. Press the Callback soft key while listening to the busy tone or ring
sound.
A confirmation screen displays on the phone.
2. Press the Exit soft key to exit the confirmation screen.
3. Your phone alerts you when the line is free. Then press the Dial soft
key to place the call again.
Transfer
Transfer allows you to redirect a connected call from your phone to another number:
You can redirect a single call to another number that you specify.
You can also connect two calls on one line or two different lines to each other
(without remaining on the line yourself).
Before completing a transfer procedure, you can press the Swap soft key to toggle
between calls, which allows you to speak privately with each party or the Cancel soft key
to cancel the transfer.
.
Transfer a call to another Number
1. Start with an active call (not on hold).
2. Press the Transfer button. On the top of the screen it will say “enter a
number to transfer” followed by pressing transfer to complete.
3. Do one of the following to enter the transfer recipient’s phone number:
Using the keypad, enter the transfer recipient’s phone
number.
OR
Press a speed-dial button.
4. Press the Transfer button or the Transfer soft key. (You do not have
to wait for the recipient to answer to complete the transfer)
5. You will be notified if the transfer was successful.
To Next Page
Loading...
Need help?
General
