Cisco 9971 Standard User Manual

User Options
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 8.0 (SIP) 99
– DND Incoming Call Alert (applies to either DND option set)—Set the alert to Beep Only,
Flash Only, Disable, or select “None” (to use the “Alert” setting set up by your system
administrator).
Related Topics
Do Not Disturb, page 81
Line Settings
Line settings affect a specific phone line (directory number) on your phone. Line settings can include
call forwarding, visual and audio message-waiting indicators, voice-message indicators, ring patterns,
and other line-specific settings.
You can set up other line settings directly on your phone:
• Set up call forwarding for your primary phone line
• Change rings, display, and other phone-model specific settings
Related Topics
• Call Forward All, page 73
• Call History, page 49
Set Up Call Forwarding Per Line
1. Sign in to your User Options web page.
2. Select User Options > Device.
3. Select a phone from the Name drop-down menu.
4. Select Line Settings.
5. If you have more than one directory number (line) assigned to your phone, select a line from the
Line drop-down menu.
6. In the Incoming Call Forwarding area, select call forwarding settings for various conditions.
7. Select Save.
Related Topics
Call Forward All, page 73

Cisco 9971 Standard Specifications

General

Brand	Cisco
Model	9971 Standard
Category	IP Phone
Language	English