Accessories
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 8.0 (SIP) 121
4. Look for installation confirmation on the phone screen.
5. Once the installation is complete, adjust the View Area and Brightness settings as needed.
Mount the Camera on Your Monitor
1. Obtain a mounting clip and USB extension cable from your system administrator.
2. Remove the protective plastic from the camera lens and body.
3. Plug the USB extension cable into the USB port on the back of the phone display.
4. Place the camera in the mounting clip.
To Next Page
Loading...
