Cisco 9971 Standard User Manual

20 OL-20616-01
Note Connecting and disconnecting the footstand may require a little more force than you expect.
Phone-Display Viewing Angle
The viewing angle of the phone display can be adjusted according to your preference.
Hold the handset and cradle with your left hand, hold the right side of the bezel (to the right of the
display) with your right hand, and then move your hands back and forth in opposite directions to
adjust the angle.
(The Cisco Unified IP Phone 9971 is shown.)
Buttons and Hardware
Your phone provides quick access to your phone lines, features, and call sessions:
• Use the feature buttons (on the left) to view calls on a line or access features such as speed dial or
All Calls.
• Use the call session buttons (on the right) to perform tasks such as making a call, answering a call,
or resuming a held call. Each call on your phone is associated with a session button.
1
Insert the curved connectors into the
lower slots.
2
Lift the footstand until the connectors
snap into the upper slots.
193119

Cisco 9971 Standard Specifications

General

Brand	Cisco
Model	9971 Standard
Category	IP Phone
Language	English