Cisco 9971 Standard User Manual

Applications
Cisco Unified IP Phone 8961, 9951, and 9971 User Guide for Cisco Unified Communications Manager 8.0 (SIP) 57
Enable Auto Transmit
1. Press the Applications button .
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
3. Select Cisco Unified Video Camera.
4. Press the Set-up softkey.
5. Press the Turn On softkey to enable the Auto Transmit feature, or press the return softkey to
return to the Set-up screen.
Adjust Camera Brightness
1. Press the Applications button .
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
3. Select Cisco Unified Video Camera.
4. Select Brightness.
– To increase brightness, press the right or up arrow on the Navigation pad.
– To decrease brightness, press the left or down arrow on the Navigation pad.
5. Press the Save softkey to set the brightness, or press the return softkey to return to the
Setup screen.
Adjust the Camera View Area
1. Press the Applications button .
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
3. Select Cisco Unified Video Camera.
4. Select View Area:
– To increase the camera viewing area, press the right or up arrow on the Navigation pad.
– To decrease the camera viewing area, press the left or down arrow on the Navigation pad.
5. Press the Save softkey to set the contrast, or press the return softkey to return to the
Setup screen.
Reset Camera
1. Press the Applications button .
2. Select Accessories. (Use the Navigation pad and Select button to scroll and select.)
3. Select Cisco Unified Video Camera and press the Reset softkey.
The phone resets the default configuration of the Cisco Unified Video Camera.
4. Press the Cancel softkey to return to the Accessories screen.

Cisco 9971 Standard Specifications

General

Brand	Cisco
Model	9971 Standard
Category	IP Phone
Language	English