Figure 17: 32-Port 100-Gigabit Ethernet Line Card with QSFP28/QSFP+
Thirty Two 100GE
QSFP28 connectors
3Ejector lever (one of two)1
Status LED4Captive installation screw
(one of two)
2
4-Port 100-Gigabit Ethernet Line Card with QSFP28
The 4-Port 100-Gigabit Ethernet (GE) line card provides four ports for QSFP28 modules that operate at a rate
of 100 Gbps.
Each line card has a single tristate Status LED to display card status. Each QSFP28 port on the line card has
a port status LED visible on the front panel. The LEDs are described in Line Card LEDs, on page 138. The
following figure shows the 4-Port 100-GE line card front panel and LEDs.
Cisco ASR 9000 Series Aggregation Services Router Ethernet Line Card Installation Guide
42
Overview
4-Port 100-Gigabit Ethernet Line Card with QSFP28
To Next Page
Loading...
