Cisco ASA 5550 Series User Manual

Contents
iv
Cisco ASA 5550 Getting Started Guide
78-17644-01
CHAPTER 5 Configuring the Adaptive Security Appliance 5-1
About the Factory-Default Configuration 5-2
About the Adaptive Security Device Manager 5-2
Using the Startup Wizard 5-3
Before Launching the Startup Wizard 5-4
Running the Startup Wizard 5-4
Setting the Media Type for Fiber Interfaces 5-6
What to Do Next 5-7
CHAPTER 6 Scenario: DMZ Configuration 6-1
Example DMZ Network Topology 6-1
Configuring the Security Appliance for a DMZ Deployment 6-4
Configuration Requirements 6-5
Starting ASDM 6-6
Creating IP Pools for Network Address Translation 6-7
Configuring NAT for Inside Clients to Communicate with the DMZ Web
Server
6-12
Configuring NAT for Inside Clients to Communicate with Devices on the
Internet
6-15
Configuring an External Identity for the DMZ Web Server 6-16
Providing Public HTTP Access to the DMZ Web Server 6-18
What to Do Next 6-24
CHAPTER 7 Scenario: Remote-Access VPN Configuration 7-1
Example IPsec Remote-Access VPN Network Topology 7-1
Implementing the IPsec Remote-Access VPN Scenario 7-2
Information to Have Available 7-3
Starting ASDM 7-4
Configuring the ASA 5550 for an IPsec Remote-Access VPN 7-5

Cisco ASA 5550 Series Specifications

General

Brand	Cisco
Model	ASA 5550 Series
Category	Firewall
Language	English