Cisco ASA 5550 Series

7-17
Cisco ASA 5550 Getting Started Guide
78-17644-01
Chapter 7 Scenario: Remote-Access VPN Configuration
Implementing the IPsec Remote-Access VPN Scenario
Note Enable split tunneling by checking the Enable Split Tunneling check box
at the bottom of the screen. Split tunneling allows traffic outside the
configured networks to be sent out directly to the Internet instead of over
the encrypted VPN tunnel.
Step 2 Click Next to continue.
Verifying the Remote-Access VPN Configuration
In Step 11 of the VPN Wizard, review the configuration attributes for the VPN
tunnel you just created. The displayed configuration should be similar to the
following: