Cisco ASA 5550 Series

6-15
Cisco ASA 5550 Getting Started Guide
78-17644-01
Chapter 6 Scenario: DMZ Configuration
Configuring the Security Appliance for a DMZ Deployment
The displayed configuration should be similar to the following:
Step 6 Click Apply to complete the adaptive security appliance configuration changes.
Configuring NAT for Inside Clients to Communicate with Devices
on the Internet
In the previous procedure, you configured a Network Address Translation (NAT)
rule that associates IP addresses from the IP pool with the inside clients so they
can communicate securely with the DMZ web server.