Cisco ASR 1004 - Page 38

Connecting the Network Management and Signal System Cables
The Cisco ASR 1004 Router has connections to both the internal Ethernet management network and the
external data network.
•
T
he internal Ethernet management network connections are made through an Ethernet port on the front
panel of the Cisco ASR 1000 Series Route Processor 1.
•
The external data network connections are made through front panel ports on several types of SPAs.
Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1004 Router:
•
To reduce the chance of interference, avoid crossing high-power lines with any interface cables.
•
Verify all cabling limitations (particularly distance) before powering on the system.
Cisco ASR 1000 Series Router Hardware Installation Guide
38
Cisco ASR 1004 Router Overview and Installation
Connecting the Network Management and Signal System Cables