(10.21.0.110).  
.Dec 22 22:22:35.812: NTP Core(DEBUG): 
ntp_receive: message received 
.Dec 22 22:22:35.812: NTP Core(DEBUG): 
ntp_receive: peer is 0x7FD044C809B0, next action is 
1.  
.Dec 22 22:22:35.812: NTP Core(DEBUG): Peer 
becomes reachable, poll set to 6.  
.Dec 22 22:22:35.812: NTP Core(INFO): 10.24.0.1 
8014 84 reachable  
.Dec 22 22:22:35.812: NTP Core(INFO): 10.24.0.1 
902D 8D popcorn popcorn  
.Dec 22 22:22:37.112: \%HA_EM-6-LOG: cli_log: 
host[ASR1001X] user[script] port[0] exec_lvl[15] 
command[show ntp status ] Executed  
.Dec 22 22:22:37.811: NTP message sent to 
10.24.0.1, from interface 'GigabitEthernet0/0/0' 
(10.21.0.110).  
.Dec 22 22:22:37.812: NTP message received from 
10.24.0.1 on interface 'GigabitEthernet0/0/0' 
(10.21.0.110).  
.Dec 22 22:22:37.812: NTP Core(DEBUG): 
ntp_receive: message received  
.Dec 22 22:22:37.812: NTP Core(DEBUG): 
ntp_receive: peer is 0x7FD044C809B0, next action is 
1.  
.Dec 22 22:22:37.812: NTP Core(INFO): 10.24.0.1 
963A 8A sys_peer  
.Dec 22 22:22:37.812: NTP: 
step(0xF164A290.06E65E00): local_offset = 
0x00000000.00000000, curtime = 
0xE74F9D7D.CFDF3DA0  
.Mar 18 14:18:53.838: NTP Core(NOTICE): trans 
state : 5  
 
 
*Jul  7 18:43:14.595: %MKA-3-
MKPDU_VALIDATE_FAILURE: (Gi0/0/1 : 11) 
Validation of a MKPDU failed for RxSCI 
6412.25a1.a409/0009, AuditSessionID , CKN 
1234000000000000000000000000000000000000000
000000000000000000000 
  Use of the “upgrade” command.  
 
*Jul 10 11:04:09.179: %PARSER-5-
CFGLOG_LOGGEDCMD: User:cisco  logged 
command:upgrade 
*Jul 10 11:04:09.179: %PARSER-5-
CFGLOG_LOGGEDCMD: User:cisco  logged