License key information is maintained as part of the CLI configuration. Each time a key is installed or
updated, you must re-save the configuration file.
Important
Step 1
Open the configuration file to which the new license key commands are to be copied.
Step 2
Copy the license as shown in the example, including the "\ (double-quote slash). Please note: this is not a functional
license.
"\
VER=1|C1M=000-0000-00|C1S=03290231803|C2M=11-1111-11-1|C2S=\STCB21M82003R80411A4|
DOI=0000000000|DOE=00000000|ISS=1|NUM=13459|0000000000000|LSP=000000|LSH=000000|
LSG=500000|LSL=500000\|FIS=Y|FR4=Y|FPP=Y|FCS=Y|FTC=Y|FMG=Y|FCR=Y|FSR=Y|FPM=Y|FID=Y|
SIG=MCwCF\Esnq6Bs/XdmyfLe7rHcD4sVP2bzAhQ3IeHDoyyd6388jHsHD99sg36SG267gshssja77
end
Step 3
Paste the license key into the configuration
Paste the license key information at the beginning of the configuration file to ensure the system has the
expected capacity and features before it configures contexts.
Important
Step 4
Save your configuration as described in the Verifying and Saving Your Configuration chapter.
License Expiration Behavior
When a license expires, there is a built-in grace period of 30 days that allows normal use of the licensed session
use and feature use licenses. This allows you to obtain a new license without any interruption of service.
The following Exec mode command lists the license information including the date the grace period is set to
expire:
show license information
Requesting License Keys
License keys for the system can be obtained through your Cisco account representative. Specific information
is required before a license key may be generated:
•
Sales Order or Purchase Order information
•
Desired session capacity
•
Desired functionality
Viewing License Information
To see the license detail, enter the following command from the Exec mode:
[local]host_name# show license information [ full | key [ full ] ]
ASR 5500 System Administration Guide, StarOS Release 21.5
100
Software Management Operations
License Expiration Behavior
To Next Page
Loading...
